rojo/.cursor/rules/roblox/reference/engine/classes/ControllerManager.yaml

# This file is automatically generated. Please don't edit it manually.
# To submit a bug report on the content, see
# https://devforum.roblox.com/c/bug-reports/documentation-issues/72

name: ControllerManager
type: class
memory_category: Instances
summary: |
  Manages simulated motion control for its assigned
  `Class.ControllerManager.RootPart` .
description: |
  The `Class.ControllerManager` instance manages simulated motion control for
  its assigned `Class.ControllerManager.RootPart`. It can be used to build a
  physics-based character controller.
code_samples: []
inherits:
  - Instance
descendants: []
tags: []
deprecation_message: ''
properties:
  - name: ControllerManager.ActiveController
    summary: |
      The `Class.ControllerBase` that is set to be activated on the character.
    description: |
      The `Class.ControllerBase` that is set to be activated on the character.
      It does not guarantee that the specified `Class.ControllerBase` is, in
      fact, active. If the `Class.ControllerBase` cannot be activated for
      whatever reason, such as being outside of the character's
      `Class.WorldRoot` or no `Class.Part` being found to use as the floor for a
      `Class.GroundController`, it will remain set and the
      `Class.ControllerManager` will attempt to activate it in the next frame.
      This property can be set to `nil` to disable the physics controller.
    code_samples: []
    type: ControllerBase
    tags: []
    deprecation_message: ''
    security:
      read: None
      write: None
    thread_safety: ReadSafe
    category: Behavior
    serialization:
      can_load: true
      can_save: true
    capabilities:
      - Avatar
  - name: ControllerManager.BaseMoveSpeed
    summary: |
      The base linear movement speed used by all controllers.
    description: |
      The base linear movement speed used by all controllers. Controllers
      individually customize speed by setting the
      `Class.ControllerBase.MoveSpeedFactor` property.
    code_samples: []
    type: float
    tags: []
    deprecation_message: ''
    security:
      read: None
      write: None
    thread_safety: ReadSafe
    category: Behavior
    serialization:
      can_load: true
      can_save: true
    capabilities:
      - Avatar
  - name: ControllerManager.BaseTurnSpeed
    summary: |
      The base angular turning speed used by all controllers.
    description: |
      The base angular turning speed used by all controllers to align the
      character to face the desired direction.
    code_samples: []
    type: float
    tags: []
    deprecation_message: ''
    security:
      read: None
      write: None
    thread_safety: ReadSafe
    category: Behavior
    serialization:
      can_load: true
      can_save: true
    capabilities:
      - Avatar
  - name: ControllerManager.ClimbSensor
    summary: |
      A reference to the sensor data used while a `Class.ClimbController` is
      active.
    description: |
      A reference to the sensor data used while a `Class.ClimbController` is
      active. A `Class.ClimbController` will use the
      `Class.ControllerPartSensor.HitPart`,
      `Class.ControllerPartSensor.HitFrame`, and
      `Class.ControllerPartSensor.HitNormal` for climb movement computations.
      Typically a `Class.ControllerPartSensor` set to `Enum.SensorMode.Ladder`
      is used here. Otherwise, you can override the sensor's outputs to direct
      what sensor data you want the `Class.ClimbController` to use.
    code_samples: []
    type: ControllerSensor
    tags: []
    deprecation_message: ''
    security:
      read: None
      write: None
    thread_safety: ReadSafe
    category: Behavior
    serialization:
      can_load: true
      can_save: true
    capabilities:
      - Avatar
  - name: ControllerManager.FacingDirection
    summary: |
      The unit vector describing the desired direction to face.
    description: |
      The unit vector describing the desired direction to face. Aligns the
      `Datatype.CFrame.LookVector|LookVector` of the
      `Class.ControllerManager.RootPart` to this. Any `Datatype.Vector3`
      assigned will be automatically unitized.
    code_samples: []
    type: Vector3
    tags: []
    deprecation_message: ''
    security:
      read: None
      write: None
    thread_safety: ReadSafe
    category: Input
    serialization:
      can_load: true
      can_save: true
    capabilities:
      - Avatar
  - name: ControllerManager.GroundSensor
    summary: |
      A reference to the sensor data used while a `Class.GroundController` is
      active.
    description: |
      A reference to the sensor data used while a `Class.GroundController` is
      active. A `Class.GroundController` will use the
      `Class.ControllerPartSensor.HitPart`,
      `Class.ControllerPartSensor.HitFrame`, and
      `Class.ControllerPartSensor.HitNormal` for ground movement computations.
      Typically a `Class.ControllerPartSensor` set to `Enum.SensorMode.Floor` is
      used here. Otherwise, you can override the sensor's outputs to direct what
      sensor data you want the `Class.GroundController` to use.
    code_samples: []
    type: ControllerSensor
    tags: []
    deprecation_message: ''
    security:
      read: None
      write: None
    thread_safety: ReadSafe
    category: Behavior
    serialization:
      can_load: true
      can_save: true
    capabilities:
      - Avatar
  - name: ControllerManager.MovingDirection
    summary: |
      The vector describing the desired direction to move in.
    description: |
      The vector describing the desired direction to move in, with a magnitude
      between 0 and 1. This is multiplied by
      `Class.ControllerManager.BaseMoveSpeed|BaseMoveSpeed` to determine a final
      target move velocity. The `Class.ControllerManager.RootPart|RootPart` will
      attempt to move in this direction based on the rules defined by the
      `Class.ControllerManager.ActiveController|ActiveController`.
    code_samples: []
    type: Vector3
    tags: []
    deprecation_message: ''
    security:
      read: None
      write: None
    thread_safety: ReadSafe
    category: Input
    serialization:
      can_load: true
      can_save: true
    capabilities:
      - Avatar
  - name: ControllerManager.RootPart
    summary: |
      The `Class.BasePart` where the controller's forces and torques are
      applied.
    description: |
      The `Class.BasePart` where the controller's forces and torques are
      applied. With a typical `Class.Humanoid`-based character, the
      `Class.Humanoid.RootPart` is assigned as the
      `Class.ControllerManager.RootPart`.
    code_samples: []
    type: BasePart
    tags: []
    deprecation_message: ''
    security:
      read: None
      write: None
    thread_safety: ReadSafe
    category: Behavior
    serialization:
      can_load: true
      can_save: true
    capabilities:
      - Avatar
  - name: ControllerManager.UpDirection
    summary: ''
    description: ''
    code_samples: []
    type: Vector3
    tags: []
    deprecation_message: ''
    security:
      read: None
      write: None
    thread_safety: ReadSafe
    category: Input
    serialization:
      can_load: true
      can_save: true
    capabilities:
      - Avatar
methods: []
events: []
callbacks: []